Instructions
HYUNDAI I30 – HYUNDAI I20
HYUNDAI I30
REMOVE THE ORIGINAL VALVE BY DISCONNECTING THE ELECTRICAL SYSTEM FROM THE SOLENOID VALVE
AND THE SMALL TUBE ON THE VALVE.
DISCONNECT LARGE AIR RETURN TUBE ALSO ON THE VALVE.
DISASSEMBLE OUR VALVE FROM THE STAND.
INSTALL THE STAND ( WITHOUT THE VALVE ) WHERE THE ORIGINAL VALVE WAS MOUNTED BEFORE.
CONNECTING THE SMALL TUBE ( PREVIOUSLY DISCONNECTED FROM THE ORIGINAL VALVE )ON THE THREADED STUD SCREWED ON THE BASE OF THE VALVE, AND THE AIR RETURN TUBE.
Bolt OUR VALVE ( PREVIOUSLY DISASSEMBLED ) ON TO THE SUPPORT.
CONNECT OUR ELECTRICAL WIRING ( supplied with the valve ) ON TO THE CONNECTOR THAT WAS PREVIOUSLY ATTACHED TO THE ELECTROVALVE. AND THE OTHER END TO THE VALVE ITSELF.
CONNECT THE CABLE WITH LUGS COMING OUT OF THE ELECTRONIC SYSTEM TO GROUND.
WITH THE ADJUSTMENT LEVER YOU CAN DECIDE WHETHER TO KEEP:
EXHAUST OPEN,EXHAUST CLOSED,OR PARTIALIZE UNTIL YOU FIND THE SOUND YOU LIKE
–
HYUNDAI I20
REMOVE THE ORIGINAL VALVE BY DISCONNECTING THE ELECTRICAL SYSTEM AND PIPING ON THE SOLENOID VALVE
AND THE LARGE AIR RETURN PIPE.
DISASSEMBLE OUR VALVE FROM THE STAND.
INSTALL THE STAND ( WITHOUT THE VALVE ) WHERE THE ORIGINAL VALVE WAS MOUNTED BEFORE.
CONNECTING THE TWO PIPES ON THE BASE.( THEY HAVE NO POSITION ) AND THE AIR EXHAUST PIPE.
SCREW OUR VALVE ( PREVIOUSLY DISASSEMBLED ) ON THE STAND.
CONNECT THE ELECTRICAL WIRING.
CONNECT THE CABLE WITH LUGS COMING OUT OF THE ELECTRONIC SYSTEM TO GROUND.
WITH THE ADJUSTMENT LEVER YOU CAN DECIDE WHETHER TO KEEP:
EXHAUST OPEN,EXHAUST CLOSED,OR PARTIALIZE UNTIL YOU FIND THE SOUND YOU LIKE.
#bonalume #car workshop #tuning #instructions