New 3-position petrol pressure regulator. With this new model you can choose the desired incremental ratio compared to the turbine pressure. You can choose among the following ratios: (1 to 1) –( 1 to 1.4) –( 1 to 2.4) The regulator has two air inlets that are used according to specific fuel-setting requirements. Using the bottom inlet you will have ratio 1 to 1 (in other words, 1 bar of the turbine pressure will be equal to an increase of 1 bar of petrol pressure) Using the top inlet you will have ratio 1 to 1.4 (in other words, 1 bar of turbine pressure will be equal to an increase of 1.4 bar of petrol pressure) Using both inlets, you will have ratio 1 to 2.4 (in other words, 1 bar of turbine pressure will be equal to an increase of 2.4 bar of petrol pressure). all this maintaining to the function of the manual regulation of the pressure benzine. On request, an air inlet pilot controller can be supplied. This controller can control just one inlet. Therefore one inlet ( 1 to 1 or 1 to 1.4) will always be operated with pressure and vacuum and the other will be piloted by the controller. The controller will be activated in the presence of two signals (which can be set at choice). Example: accelerator potentiometer signal + air flow meter signal or turbine pressure signal. Or other electronic devices emitting values in Volts. available for all the models of car with dedicated version or standard.
Code to order: RPBTR
Price: 350.00 Euro (+ VAT AND SHIPPING COST)